StreetBond 120 Pavement Coatings

StreetBond SB120 is a two-component extended formulation of StreetBond SB150 advanced waterborne epoxy-modified acrylic coating. StreetBond SB120 can be used on textured (stamped) or non-textured (flat) asphalt pavement. StreetBond SB120 can be used on concrete with proper surface preparation and primer. (Refer to StreetBond Installer’s Guides for additional information.) StreetBond SB120 is formulated for use on pedestrian areas with very low-to-no vehicular traffic. StreetBond SB120 Pavement Coating Part A, when mixed with StreetBond SB120 Part B and StreetBond Colorant, can be applied to:

Pedestrian Plazas
Raised Medians


Product Properties

Shelf Life Shelf life is 24 months.
5-gallon Part A (3.75 gal net content) Part B:1-pint (10 oz net content) Always use with Colorant (1 pint or 1 quart depending on color)
55-gallon Part A (45 gallon net content) Part B: 2-gallon (1.6 gallon net content) Always use with Colorant (2-gallon)

Why Choose StreetBond SB120 Pavement Coatings?

StreetBond SB120 Pavement Coatings are:

  • Flexible: StreetBond SB120 Pavement Coating works with the normal expansion and contraction of asphalt surfaces and will no peel, delaminate, or shrink-crack when installed according to manufacturer’s specifications.*

  • Durable: StreetBond SB120 Pavement Coating is designed to withstand pedestrian traffic and water damage, and has excellent adhesion characteristics:

  • Environmentally Responsible. StreetBond SB120 Pavement Coating is water-based. It has very low volatile organic content (VOC), and meets Southern California Air Quality Management District regulations (SCAQMD).

  • Color Stable: StreetBond SB120 Pavement Coating incorporates UV-stable pigments that help resist fading in harsh sunlight.*

  • Skid Resistant: StreetBond SB120 Pavement Coating has excellent friction properties, which provide slip and skid resistance.

StreetBond Overview

Take a minute to watch our 60-second video and see the enhancement potential of StreetBond.

About Us

StreetBond Pavement Coatings bond to both asphalt and concrete surfaces to provide a durable, aesthetic finish that helps protect and extend the life of the pavement. With a palette of over 50 vivid colors including solar reflective options, the possibilities are limited only by your imagination. StreetBond can transform public spaces and playgrounds, enhance safety by delineating cycle lanes and pathways, and create a welcoming environment for customers. StreetBond coatings are flexible, durable, chemical resistant, color stable, and environmentally responsible. Check out the StreetBond Visualiser on this site to start designing. For more information, contact us at or call 800-922-8800.

Limited Warranty Information

A 1-year limited warranty is offered through the purchase of the StreetBond materials. The Limited Warranty language as printed on the pails is shown below.

Manufacturer warrants that the product contained in this container will be free from manufacturing defects that adversely affect its performance for 1 year following completion of installation on a sound pavement substrate, provided that the product is installed during the shelf life indicated on this label and in accordance with published application instructions. Should defective material be found, Manufacturer will replace that portion of the product that peels, delaminates, or shows abnormal wear as a result of a manufacturing defect or, at its sole option, provide the cash value of such replacement product. There are no other product warranties, express or implied, including any implied warranties of merchantability or fitness for a particular use. Manufacturer is not liable for any consequential or incidental damages of any kind, including but not limited to interior or exterior damages. Manufacturer is not liable for any consequential or incidental damages of any kind, including but not limited to interior or exterior damages. Other exclusions may apply. See StreetBond® 1‑year Limited Warranty at for complete coverage and restrictions.